How to Zero a Burris AR 332 Scope
Zeroing a scope is a crucial step in ensuring that your firearm is properly sighted in. Whether you’re a seasoned hunter or a new shooter, understanding how to zero a Burris AR 332 scope is essential for accuracy. In this detailed guide, we’ll walk you through the process step by step, ensuring that you achieve the best possible performance from your scope.
Understanding the Burris AR 332 Scope
The Burris AR 332 scope is a popular choice among shooters for its durability, clarity, and ease of use. Before we dive into the zeroing process, let’s take a quick look at the key features of this scope:
| Feature | Description |
|---|---|
| Objective Lens | 40mm objective lens for maximum light transmission and clarity |
| Reticle | ETR-2 reticle with MOA hash marks for precise aiming |
| Adjustment Turrets | Adjustable turrets with 1/4 MOA click value for fine-tuning |
| Material | Aluminum alloy construction for durability and lightweight design |
With these features in mind, let’s move on to the zeroing process.
Step 1: Choose a Shooting Range
Before you begin, find a suitable shooting range with a known distance. A distance of 100 yards is a common starting point, but you can adjust this based on your comfort level and the specific requirements of your firearm.
Step 2: Prepare Your Firearm
Ensure that your firearm is unloaded and clear of any ammunition. Place your firearm on a secure rest or bench to prevent any movement during the shooting process.
Step 3: Mount the Scope
Check that the scope is securely mounted on your firearm. Make sure that the scope is level and that the reticle is centered in the field of view.
Step 4: Adjust the Turrets
Locate the adjustment turrets on the side of the scope. These turrets are used to adjust the windage and elevation of the reticle. To adjust the windage, turn the left-hand turret, and to adjust the elevation, turn the right-hand turret.
Step 5: Take Aim and Fire
Take aim at the target and fire a single shot. Observe where the bullet impacts on the target. If the bullet is above the target, turn the elevation turret down to lower the reticle. If the bullet is below the target, turn the elevation turret up to raise the reticle. If the bullet is to the left of the target, turn the windage turret to the right to move the reticle to the right. If the bullet is to the right of the target, turn the windage turret to the left to move the reticle to the left.
Step 6: Repeat the Process
After making the initial adjustments, take another shot and observe the impact. Continue adjusting the turrets until the bullet consistently impacts on the target at the desired point of aim.
Step 7: Verify the Zero
Once you have achieved a consistent zero, verify the accuracy by taking additional shots at different distances. This will ensure that your scope is properly sighted in for various shooting scenarios.
Step 8: Maintain Your Scope
Regular maintenance is essential to keep your Burris AR 332 scope in top condition. Clean the lens and exterior regularly, and check the adjustment turrets for any signs of wear or damage.
By following these steps, you’ll be able to zero your Burris AR 332 scope with confidence and accuracy. Happy shooting!