Sling Keeper AR-15 DIY: A Comprehensive Guide
Embarking on a DIY project for your AR-15 can be an exciting and rewarding experience. One such project is the installation of a Sling Keeper, which not only adds functionality but also enhances the aesthetics of your firearm. In this guide, we will walk you through the process of installing a Sling Keeper on your AR-15, covering the necessary tools, materials, and step-by-step instructions.
Tools and Materials Needed
Before you start, ensure you have the following tools and materials:
| Tool/Item | Description |
|---|---|
| AR-15 | Your firearm |
| Sling Keeper | Specifically designed for AR-15s |
| Hex Wrench | Used to tighten and loosen screws |
| Allen Wrench | For adjusting the sling keeper |
| Gun Cleaning Kit | For cleaning the firearm after installation |
| Clamp | For holding the firearm securely during installation |
Once you have gathered all the necessary tools and materials, you are ready to begin the installation process.
Step-by-Step Installation Guide
Follow these steps to install your Sling Keeper on your AR-15:
-
Remove the magazine and chamber a round. This is for safety reasons to ensure the firearm is unloaded before beginning the installation.
-
Locate the sling mount on your AR-15. This is typically located on the left side of the receiver, just above the magazine well.
-
Clamp the firearm securely in a vice or use a clamp to hold it steady. This will prevent any movement during the installation process.
-
Attach the Sling Keeper to the sling mount using the provided screws. Tighten the screws with a hex wrench until the Sling Keeper is securely in place.
-
Adjust the Sling Keeper to the desired position using the Allen wrench. Ensure that the Sling Keeper is parallel to the ground and that it is not too tight or too loose.
-
Check the fit of the Sling Keeper by attaching a sling to it. Make sure the sling is securely attached and that it does not interfere with the operation of the firearm.
-
Clean the firearm thoroughly to remove any debris or dirt that may have accumulated during the installation process.
-
Test the firearm to ensure that it operates correctly and that the Sling Keeper is functioning as intended.
Once you have completed these steps, your Sling Keeper is installed and ready to use.
Benefits of Installing a Sling Keeper
Installing a Sling Keeper on your AR-15 offers several benefits:
-
Enhanced Stability: The Sling Keeper provides a stable platform for attaching a sling, which can be beneficial for carrying the firearm or for shooting from awkward positions.
-
Improved Aesthetics: The Sling Keeper adds a sleek and modern look to your AR-15, enhancing its overall appearance.
-
Increased Functionality: The Sling Keeper allows for quick and easy attachment and removal of the sling, making it more convenient to use.
By following this guide, you can successfully install a Sling Keeper on your AR-15 and enjoy the benefits it brings to your firearm.
Conclusion
Installing a Sling Keeper on your AR-15 is a straightforward DIY project that can be completed in a few simple steps. By following the instructions provided in this guide, you can enhance the stability, aesthetics, and functionality of your firearm. So, gather your tools and materials, and get ready to embark on this exciting DIY project!